다운로드 Sleep Talk

다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. Sleep Talk - Sound Recorder 귀하의 전화 번호.

1 단계 : 다운로드 Sleep Talk - Sound Recorder 귀하의 기기에서

아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.  

2 단계 : 기기에 타사 앱 허용

설치하려면 Sleep Talk - Sound Recorder 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.

3 단계 : 파일 관리자로 이동

이제 위치를 찾으십시오 Sleep Talk - Sound Recorder 방금 다운로드 한 파일입니다.
일단 당신이 Sleep Talk - Sound Recorder 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.

4 단계 : 즐기십시오

Sleep Talk - Sound Recorder 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!

개발자 설명

Listen to your Sleep from Apple Watch! With watchOS 4 and the new background recording — monitor the noises that occur while your eyes are shut each night. Using a Speech Detection Algorithm, Sleep Talk only records when it hears fluctuations in sound that mimic human vocals*. Scrubbing through hours of audio each morning, and large audio file sizes are a thing of the past. • Record directly from your Apple Watch (Enable Do No Disturb while using) • Listen and scrub with the Digital Crown through your night's sound from your Watch after you wake • Can be used worn, or placed charging bedside (recommended for first gen and 38mm watches)** • Stores the 3 most recent nights on the watch • Syncs in the background with the iPhone app for a full archive • Share the audio from the iPhone app • Optionally save your asleep/in bed duration to Health • Integrates with the sleep tracking app, Sleep Pulse 3 Motion, to provide your potential sleep talk recordings from your night with a sleep analysis. Check out the app, "Sleep Pulse 3 Motion" for more info. Quick Tips: 1. Before using Sleep Talk, you must swipe up on your Watch face screen to enable Do Not Disturb mode. This is important in order for the app to continuously record throughout the night, as any notifications may interrupt the recording and your sleep! 2. If placing bedside on a table, desk, or stand ensure the microphone opening(s) are not covered. The openings are located on the bottom left side of the watch and can occur as either one or two holes depending on watch model. 3. To end the listening and save the recording each morning firmly press on the record view for options. 4. Enabling "Theater Mode", which is beside "Do Not Disturb", on the watch control center will ensure the screen will only wake upon touch while you sleep. (The Apple Watch will not light up unless tapped) *Because a robust processing backend for speech detection isn't practical for the Apple Watch, detection is done on the device in real time to its best ability with the sensors and processing power. Fluctuations in decibels (sound) that mimic the human voice is what Sleep Talk is listening for each night. Because of this fans, hums, clocks, crickets, etc won't initiate recordings. Though this also means the algorithm isn't perfect, if worn to bed direct contact with the microphone opening, shuffling of sheets, or different sleeping positions could cause false positives. Most nights (unless you are a prolific sleep talker) will have less than 3 minutes of audio recorded... even less if not worn and placed bedside.* **Best used when placed on the charger bedside. If worn on wrist activating airplane mode will lessen its energy use; ensure before wake airplane mode is disabled so the data may sync with your iPhone.** ***Sleep Talk requires an Apple Watch with watchOS 4 or greater to record sleep audio, iPhone dedicated recording coming in a future update*** Information on Sleep Talking: https://sleepfoundation.org/sleep-disorders-problems/sleep-talking https://sleep.org/articles/sleep-talking/