호환 APK 다운로드
다운로드 | 개발자 | 평점 | 호환성 | 앱 크기 (MB) |
---|---|---|---|---|
ESC & Servo Controller 다운로드 Android Playstore 다운로드 → |
Kenzap Pte Ltd | 0 | 331k | |
ESC & Servo Controller 다운로드 Android |
Kenzap Pte Ltd | 0 | Android 4.0.3 | 331k |
Arduino Servo Controller 다운로드 Android |
Arun Paul | 0 | Android 4.1 | 5.4M |
Arduino Servo Motor Control 다운로드 Android |
BlueCore Tech | 0 | Android 1.6 | 2.1M |
Uno Servo control 다운로드 Android |
BivekBarman | 0 | Android 5.0 | 7.3M |
Servo Controller 다운로드 Android |
Jatzuk | Android VARY | Varies with device | |
S4A controller for servo motors 다운로드 Android |
FTIS UNPAR | 0 | Android 2.1 | 3.0M |
btServoTester 다운로드 Android |
www.picoder.com | 0 | Android 4.2 | 1.4M |
ServoControll 다운로드 Android |
Iones Costa | 0 | Android 4.3 | 3.2M |
NodeMCU Servo control 다운로드 Android |
BivekBarman | 0 | Android 5.0 | 7.3M |
Bluetooth Servo 다운로드 Android |
e-lab innovations | 0 | Android 5.0 | 622k |
Remote Control for Roku 다운로드 Android |
Kraftwerk 9 Inc. | 40047 | Android VARY | Varies with device |
Roku Remote Control: RoByte 다운로드 Android |
TinyByte Apps, LLC | 58396 | Android 5.0 | 9.2M |
Control 1 Servo Motor Arduino Bluetooth 다운로드 Android |
VictorSaavedra | 0 | Android 2.1 | 5.7M |
TV Control for Roku TV Remote 다운로드 Android |
Vulcan Labs | 67920 | Android 5.0 | 27M |
NodeMCU Servo control PRO 다운로드 Android |
BivekBarman | 0 | Android 5.0 | 5.6M |
보너스 ***: 더 많은 APK 다운로드 소스
다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. Servo Remote 귀하의 전화 번호.
아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.
설치하려면 Servo Remote 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.
이제 위치를 찾으십시오 Servo Remote 방금 다운로드 한 파일입니다.
일단 당신이 Servo Remote 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.
Servo Remote 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!
The Servo Remote application can remotely access Interactive Instruments servo creep controllers over a network connection as though the operator is controlling the system manually with the keypad. As keys are pressed on the iPhone application, commands are directed to the servo controller and the controllers LCD information is fed back to the iPhone application. Both the remote keypad and the servo controller panel keypad can be manipulated at the same time, pressing a key on the control panel will update both the LCD along with any applications monitoring the same servo system on the network. More than one iPhone application can remotely access and control a single controller at the same time. Pressing the Find button will attempt to identify any servo systems on your local networks subnet. If the system is not on the local subnet, manually enter the IP address and press Select to establish connect. Manual IP connections allow access beyond a local subnet such as over a VPN connection or a separate WiFi subnet. The operator would need to know the physical IP of the servo controller since auto-detection beyond the subnet is not available. Use the standard IP address format with decimal point separators (eg. 192.168.0.100). For more information about or products, be sure to visit our WEB site at www.interactiveinstruments.com.