호환 APK 다운로드
다운로드 | 개발자 | 평점 | 호환성 | 앱 크기 (MB) |
---|---|---|---|---|
Sennheiser Smart Control 다운로드 Android Playstore 다운로드 → |
Sennheiser Consumer Audio GmbH |
10997 | 236M | |
Sennheiser Smart Control 다운로드 Android |
Sennheiser Consumer Audio GmbH |
10997 | Android 8.0 | 236M |
Sennheiser MobileConnect 다운로드 Android |
Sennheiser electronic GmbH & Co KG |
217 | Android 7.0 | 56M |
Smart Assist 다운로드 Android |
Sennheiser electronic GmbH & Co KG |
22 | Android 8.0 | 91M |
Sennheiser Documentation App 다운로드 Android |
Sennheiser electronic GmbH & Co KG |
64 | Android 4.4 | 7.2M |
MEMORY MIC 다운로드 Android |
Sennheiser electronic GmbH & Co KG |
90 | Android 5.1 | 19M |
Sennheiser Momentum TW2 Guide 다운로드 Android |
onlinecamdev | 0 | Android 5.0 | 20M |
Sennheiser Momentum TW2 Guide 다운로드 Android |
Omegaje | 0 | Android 5.0 | 15M |
EPOS Connect 다운로드 Android |
EPOS GROUP A/S | 164 | Android 7.0 | 40M |
Soundcore 다운로드 Android |
Anker | 25660 | Android 5.0 | 113M |
Sony | Headphones Connect 다운로드 Android |
Sony Corporation | 84959 | Android 5.0 | 56M |
Equalizer For Bluetooth 다운로드 Android |
AudiosMaxs | 65403 | Android 5.0 | 2.8M |
Baseus倍思 다운로드 Android |
Baseus | 1848 | Android 8.0 | 53M |
Wavelet: headphone specific EQ 다운로드 Android |
pittvandewitt | 8971 | Android 9 | 4.1M |
Jaybird 다운로드 Android |
Logitech Europe S.A. | 14833 | Android 7.0 | 63M |
Jabra Sound+ 다운로드 Android |
Jabra by GN Audio | 71005 | Android 7.0 | 251M |
보너스 ***: 더 많은 APK 다운로드 소스
다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. Sennheiser WSR 귀하의 전화 번호.
아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.
설치하려면 Sennheiser WSR 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.
이제 위치를 찾으십시오 Sennheiser WSR 방금 다운로드 한 파일입니다.
일단 당신이 Sennheiser WSR 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.
Sennheiser WSR 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!
Sennheiser’s Wireless Remote Control (WSR) App turns your iOS device into a central hub for managing evolution wireless D1 (ew D1) and SpeechLine Digital Wireless (SL DW) microphone systems. Once your receivers are connected to a WiFi router via LAN cables, you will have full remote control right from your mobile device. The Arrangement view makes monitoring vital parameters like battery status, audio level and RF signal strength of multi-channel systems more organized than ever. You will never miss a warning and know early when to change batteries. Also a Walktest can be performed remotely. On iPad versions, you can even arrange the position of receivers to your liking, either matching the setup of a 19" rack or reflecting the position of performers on a stage. The ability to take photos of a performer with your iOS device camera and assign it to a receiver avatar on the screen is a powerful feature to quickly identify any wireless link. With the Editing view, you can take full control over any setting of the system. For changing the name, choosing an Equalizer, AGC or De-Esser preset, (de-)activating MUTE switch or adjusting the Audio Output Level, you do not have to be where the physical receivers are located. You can even modify any parameter for multiple receivers at the same time; speeding up setup times dramatically. WSR also allows you to comfortably update the firmware of your ew D1 and SL DW microphone system; keeping you up to date. Please make sure that your iOS device has Internet access via WiFi and the receivers are connected to the associated WiFi router via LAN cables! For initial WSR installation you need to update the firmware of your ewD1 devices! Please ensure the connections as described above and follow the instructions on your screen! FEATURES - Monitor vital status of Sennheiser ew D1 and SL DW microphones from iPhone and iPad - Full remote control of any ew D1 or SL DW setup from 1 to 12 channels simultaneously - System firmware update from your iOS device via Internet by WiFi connection - Multiple iOS devices can control the same multi-channel setup - No additional software required - Supports Retina displays DEMO MODE Activate the Demo mode on the App settings to simulate six wireless receivers without any further setup. Now you can check out all functions of the App before connecting any devices and take it to the field.