다운로드 GuitarJack Stage Control

다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. GuitarJack Stage Control 귀하의 전화 번호.

1 단계 : 다운로드 GuitarJack Stage Control 귀하의 기기에서

아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.  

2 단계 : 기기에 타사 앱 허용

설치하려면 GuitarJack Stage Control 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.

3 단계 : 파일 관리자로 이동

이제 위치를 찾으십시오 GuitarJack Stage Control 방금 다운로드 한 파일입니다.
일단 당신이 GuitarJack Stage Control 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.

4 단계 : 즐기십시오

GuitarJack Stage Control 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!

개발자 설명

The GuitarJack Stage Control app allows you to use Sonoma Wire Works' GuitarJack Stage hardware interface to control any third-party app with MIDI input (e.g. amp simulators, effects processors, recording apps). Use the GuitarJack Stage Control app to set the MIDI channel and map MIDI parameters for AmpliTube, Bias FX, Jam Up, Jam Up Pro, and other third party apps. Sonoma's FourTrack, StudioTrack, GuitarTone apps include the ability to to map MIDI parameters for GuitarJack Stage, so they do not require the use of this GuitarJack Stage Control app. Before setting up, it's best to make sure that there are no other audio/MIDI applications running on your iOS device, as there is always the possibility of these apps interfering with each other. To force other apps to close, press the Home button two times quickly. You'll see small previews of your recently used apps. Swipe left to find the app you want to close. Swipe up on the app's preview to close it. To get started, launch a third party app with MIDI input, then launch GuitarJack Stage Control, then switch back to the third party app. See instructions for using each app in the Sonoma Wire Works forum and GuitarJack Stage Control online guide. Please email Sonoma Wire Works if you have questions at [email protected] About GuitarJack Stage: GuitarJack Stage is two accessories in one: a rugged pedal controller and a premium 24-bit 2-in/2-out audio interface. Featuring studio quality 24-bit AD/DA converters, 1/4 inch jacks for all connections, an aluminum chassis, customizable pedal controls, and multi-platform compatibility, GuitarJack Stage is one of the most versatile pieces of gear on the market. GuitarJack Stage is device powered. Add an external power supply to charge an iPhone, iPad, or iPod touch while you play! Made in the U.S.A. GuitarJack Stage Features • 2-in/2-out audio interface and guitar-pedal-style controller • 24-bit/48kHz AD/DA converters by renowned audio designer, Joe Bryan, move two channels in and out with clarity and vitality • Mono Hi-Z ¼ inch input for guitar and bass with 60 dB of gain optimized for guitar, with warm, mojo-infused tone • Stereo mic/line ¼ inch input for vocals or keyboards with 60 dB of gain is ultra clean sounding • 2 analog input level knobs with LED metering • Expression pedal jack to control wah, volume, or other effects • 2 line level ¼ inch outputs (left and right) for monitors, amps, or a mixer • 1 stereo ¼ inch output for headphones • Rugged aluminum chassis • 5 Knobs, 4 foot switches, and 4 LEDs control MIDI enabled software • Works with dynamic and battery powered condenser mics. Provides 3.3 V Plug-in Power for mono or stereo Electret Condenser microphones. • Device powered (so no batteries or external power is required for any of the above features). To charge your iPhone, iPad, or iPod touch while you play, add a standard guitar pedal 9V DC power supply (e.g. Godlyke Power-All or Truetone 1-SPOT). Power supply not included. • Includes a Lightning Cable with Rugged Connector and a Standard USB Host Cable for desktop computers. http://www.sonomawireworks.com/guitarjackstage/