호환 APK 다운로드
다운로드 | 개발자 | 평점 | 호환성 | 앱 크기 (MB) |
---|---|---|---|---|
Coordinate Converter Plus 다운로드 Android Playstore 다운로드 → |
TennyApps | 483 | 4.9M | |
Coordinate Converter Plus 다운로드 Android |
TennyApps | 483 | Android 4.0 | 4.9M |
GPS 좌표 변환기 다운로드 Android |
Smart Tools co. | 1494 | Android 4.4 | 4.8M |
Lat/Long & UTM 다운로드 Android |
Edip Ahmet TAŞKIN | 222 | Android 4.3 | 기기에 따라 다릅니다. |
CoordTransform 다운로드 Android |
Santiago Martinez | 764 | Android 5.0 | 5.2M |
TMConverter Coordinate conversion 다운로드 Android |
Mat1ss | 367 | Android 4.0 | 1.6M |
Coordinate Converter 다운로드 Android |
Innovative Concepts, Inc. |
378 | Android 3.0 | 1.5M |
GPS coordinates converter 다운로드 Android |
ARiS websitewerk | 506 | Android 4.1 | 2.3M |
UTM - Lat/Long Conversor 다운로드 Android |
ArcGeek | 0 | Android 4.1 | 3.4M |
Coordinate Converter 다운로드 Android |
BlackDevelopers | 0 | Android 4.1 | 1.8M |
Degree & Decimal Converter 다운로드 Android |
Edip Ahmet TAŞKIN | 0 | Android 4.3 | 기기에 따라 다릅니다. |
WGS84 Converter 다운로드 Android |
PilaBlu Apps | 0 | Android 4.1 | 4.4M |
Coordinates Converter 다운로드 Android |
André Luiz Lima Costa |
0 | Android 4.1 | 2.1M |
Coordinate converter 다운로드 Android |
Ahmed Mohamed Hashim | 0 | Android 6.0 | 2.3M |
UTM Calc 다운로드 Android |
David Vargas | 0 | Android 4.0.3 | 1.2M |
지도 좌표 다운로드 Android |
Soft Stack Dev | 25062 | Android 5.0 | 9.9M |
보너스 ***: 더 많은 APK 다운로드 소스
다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. ECEF Coordinate Converter - between LLH and XYZ 귀하의 전화 번호.
아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.
설치하려면 ECEF Coordinate Converter - between LLH and XYZ 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.
이제 위치를 찾으십시오 ECEF Coordinate Converter - between LLH and XYZ 방금 다운로드 한 파일입니다.
일단 당신이 ECEF Coordinate Converter - between LLH and XYZ 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.
ECEF Coordinate Converter - between LLH and XYZ 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!
A tool for Calculating the geodetic coordinates (Latitude, Longitude and Height) from the Cartesian Earth-Centered-Earth-Fixed (ECEF) X, Y, Z coordinates, and Calculating the ECEF Coordinates (X, Y, Z) to the geodetic coordinates (L, L, H). PS: NAD83 = GRS80. (Reference Ellipsoid) Every point that is expressed in ellipsoidal coordinates can be expressed as an rectilinear X Y Z (Cartesian) coordinate. Cartesian coordinates simplify many mathematical calculations. The Cartesian systems of different datums are not equivalent. ECEF ("earth-centered, earth-fixed"), also known as ECR ("earth-centered rotational"), is a geographic coordinate system and Cartesian coordinate system, and is sometimes known as a "conventional terrestrial" system. It represents positions as an X, Y, and Z coordinate. The point (0,0,0) is defined as the center of mass of the earth, hence the name "earth-centered." Its axes are aligned with the international reference pole (IRP) and international reference meridian (IRM) that are fixed with respect to the surface of the earth, hence the description "earth-fixed." This term can cause confusion since the earth does not rotate about the z-axis (unlike an inertial system such as ECI), and is therefore alternatively called ECR. [Features] 1) support direct and inverse solutions (LLH to XYZ, XYZ to LLH). 2) support several types of reference ellipsoid (WGS84, GRS80(NAD83), PZ90, CGCS2000, BJ54, GDZ80 etc). 3) support using GPS to get the location, and transform it to ECEF coordinate. 4) support moving the pin on the map to obtain the latitude and longitude of the location, and transform them. 5) support saving the convertion results, and the history records can be viewed, deleted, cleaned up, and shared. 6) Every the historical record can be shown on the map, and each of them can be reduced again. [Location Input Method] 1) using the keyboard input by hand. 2) using the GPS positioning. 3) moving the pin on the map. 4) shake your iOS device. [Instructions] Direct solution (LLH -> XYZ): 1) Select the Reference Ellipsoid. 2) Tap the “GPS” button to get the location. 3) Or Input the location by keyboard. 4) Inputed the number, tap the “Done” button, then you can get the ECEF Coordinate. Inverse solution (XYZ -> LLH): 1) Select the Reference Ellipsoid. 2) Input the ECEF Coordinate components (X, Y, Z). 3) Inputed the number, tap the “Done” button, then you can get the Geodetic Coordinate.