다운로드 MyWatchdog Surveillance System

   

다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. MyWatchdog Surveillance System 귀하의 전화 번호.

1 단계 : 다운로드 MyWatchdog Surveillance System 귀하의 기기에서

아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.  

2 단계 : 기기에 타사 앱 허용

설치하려면 MyWatchdog Surveillance System 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.

3 단계 : 파일 관리자로 이동

이제 위치를 찾으십시오 MyWatchdog Surveillance System 방금 다운로드 한 파일입니다.
일단 당신이 MyWatchdog Surveillance System 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.

4 단계 : 즐기십시오

MyWatchdog Surveillance System 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!

개발자 설명

"MyWatchdog" turns your iPhone and up to seven other iOS devices into a reliable and professional alarm system. Your iPhone serves as a "monitor". The monitor is the "control center" of the alarm system. You can use this to turn the system on and off and to receive alarms from the sensors. You can use older, no-longer-used iPhones or iPads with iOS 8 or later as sensors. Place the sensors in rooms to be monitored, in objects, in your apartment, or in your vehicle. HIGHLIGHTS ● "MyWatchdog" uses your iCloud account * For the use of "MyWatchdog" - unlike other apps - neither a special account nor entering an e-mail address is required. All recorded data (logs, audio and video recordings) will be exclusively managed, transported, cached and deleted from the iCloud after downloading to your iPhone, in the private area of your iCloud account. You do not need a subscription to use it or you have to endure advertising. ● "MyWatchdog" monitors movements of the sensor (rotation, inclination, acceleration, etc. - the sensitivity is adjustable), detects noises (also with adjustable sensitivity), and has intelligent sophisticated video surveillance including person detection and tracking and a detector for object movements. For video surveillance, you can use the front or rear camera (with the video light if needed). ● As soon as an alarm event occurs, you will be notified immediately with a push message. If you want, the sensors can also send an SMS to any mobile phone **. This will allow you to automatically request assistance from a third party during a burglary, even if you are not around. In the event of an alarm, it is even possible to have a sensor a prerecorded message from you read by a sensor by to warn the intruder: "The cash register is empty! Burglary is not worth it! The police are on their way!" ● All alarm events are recorded automatically (audio, video and video recording, motion profile). With your iPhone (monitor) you can view the events and forward with one click. If you have an Apple Watch, you can also view all audio and video recordings and the tracking log on it. ● With Live View **, you have a direct line to each of your sensors, and you can hear 24/7 and see what's going on in your house. From the live broadcast, you can create a recording with one click. You start Live View by a swiping to the left on the desired sensor in the overview. ● Activating and deactivating your alarm system is done centrally with your iPhone configured as a monitor or from your Apple Watch. But you can also use the "AUTO" function ***: If you are near a sensor with your monitor, this sensor will automatically be switched off. If you move away from a sensor, it will be reactivated. So you avoid a false alarm and do not forget to activate your alarm system. ● Easiest installation: Select the monitor mode on your iPhone and the sensor mode **** on the "old" device. Using the sensor, scan the barcode from the monitor. Both devices will then be registered with your Apple ID in your iCloud. You can now individually set, activate and deactivate each of the registered sensors to your needs (from the monitor). * Important: Your monitor and sensors must use the same Apple ID to communicate through your iCloud account. ** Additional option, via In App Purchase *** Requires enabled "Location services in the background" and Bluetooth sharing **** The video and audio monitoring of the sensor runs exclusively in the foreground of the app. Use your charger for the power supply!