다운로드 Ribn

다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. Ribn 귀하의 전화 번호.

1 단계 : 다운로드 Ribn 귀하의 기기에서

아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.  

2 단계 : 기기에 타사 앱 허용

설치하려면 Ribn 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.

3 단계 : 파일 관리자로 이동

이제 위치를 찾으십시오 Ribn 방금 다운로드 한 파일입니다.
일단 당신이 Ribn 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.

4 단계 : 즐기십시오

Ribn 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!

개발자 설명

Ribn is a MIDI controller with 8 assignable ribbons. What makes Ribn unique is its ability to record and loop your finger movement. This allows you to add organic repeating modulation to your synths and effects, kind of like complex LFOs. You can assign a unique MIDI channel and CC# to each ribbon. As long as your gear responds to MIDI CC messages you will be able to control it with Ribn. ** FEATURES ** • 8 MIDI CC ribbon pads • Add modulation to your MIDI hardware synths, effects, eurorack modulars, drum machines, etc. • Configurable MIDI channel and CC# per ribbon • You can name each ribbon to help you identify what parameter it's controlling • Turn off looping on individual ribbons to turn them into regular sliders • Choose any number of ribbons between 1 and 8 • Full screen mode (removes navigation bar to help you focus) • Switch between 3 sets of configurations using presets • MIDI sending works while the app is in the background • iPad landscape mode • Select multiple MIDI outputs • Ribbons record and loop your finger movement • Use a wired MIDI interface, Bluetooth or Wi-Fi • All settings are saved automatically • Works with external hardware as well as other iOS synths • Works on iPhone (including iPhone X) and iPad starting with iOS 10 ** EXAMPLE USES ** • Control hardware MIDI synths parameters like the filter cutoff frequency, resonance, oscillator octave, etc. • Control any soft synth in Ableton Live (or your favorite DAW) by connecting your iOS device to your Mac via Wi-Fi and choosing "Session 1" as the MIDI output in Ribn. • Control your Eurorack modules by running Ribn through a MIDI to CV converter. • Control other iOS synths like the Moog Model 15 or Arturia iSEM. • Control drum machines and effects. For example, try controlling the room size of a reverb effect unit with a looping ribbon or the snappiness of a snare drum on a drum machine. The possibilities are endless. • Daisy chain your MIDI hardware using MIDI Thru ports and assign each ribbon to a different MIDI channel. This way you can control more than one piece of hardware at a time. For example, you can assign the first 4 ribbons to a synth and the last 4 to an effect unit. ** HOW IT WORKS ** • Connect your MIDI gear (like a synth) to your iOS device using a MIDI interface (wired or bluetooth) • Launch Ribn and select your MIDI interface in the settings page. • Find out which CC# and MIDI channel your gear responds to (usually at the end of the manual) and enter this information in RIbn's edit view. • Slide your finger on a ribbon to send CC values and control the parameters on your MIDI gear. ** WHAT IS MIDI AND CC? ** • MIDI is just the way electronic musical instruments talk to each other. • CC (Continuous Controller) is just a way to control various parameters using MIDI. For example, a synth's filter cutoff frequency can be controlled using a MIDI CC signal. ** NOTE ** • Ribn is a MIDI controller and doesn't produce any sounds. To use Ribn you must connect it to a device that responds to MIDI CC signals (check your gear's manual to be sure). • Ribn doesn't send note data, it only sends CC signals (you can't play melodies with it, but you can control various parameters like synthesizer filters, or effects settings). • To connect your iOS device to MIDI gear you will need to buy a MIDI interface. A MIDI interface typically connects to your iOS lightning port and provides standard MIDI DIN ports to connect to your hardware. There are also bluetooth MIDI interfaces that connect wirelessly. Alternatively, you can connect to your Mac over Wi-Fi and control software synths that way. This setup is a little more complex but totally doable (I've tested controlling Ableton Live plugins over Wi-Fi with Ribn and it worked perfectly). • Audiobus and AUv3 are not supported at this time. However, you can still control other iOS synths by routing the internal MIDI ports and having Ribn run in the background.