호환 APK 다운로드
다운로드 | 개발자 | 평점 | 호환성 | 앱 크기 (MB) |
---|---|---|---|---|
Magnetic Counter - RPM Meter 다운로드 Android Playstore 다운로드 → |
UAB Sailracer | 489 | 818k | |
Magnetic Counter - RPM Meter 다운로드 Android |
UAB Sailracer | 489 | Android 2.2 | 818k |
Magnetic Field Counter 다운로드 Android |
keuwlsoft | 90 | Android VARY | 기기에 따라 다릅니다. |
Magnetic Tool 다운로드 Android |
Danfoss A/S | 261 | Android 5.0 | 40M |
Counter 다운로드 Android |
Roman T | 5026 | Android 4.4 | 1.0M |
Tally Counter 다운로드 Android |
Marcel Bochtler | 2990 | Android 5.0 | 8.4M |
AC Magnetic Field Meter 다운로드 Android |
keuwlsoft | 137 | Android VARY | 기기에 따라 다릅니다. |
Click Counter 다운로드 Android |
FunCoolApps | 3625 | Android 4.0 | 1.7M |
Counter 다운로드 Android |
DaisyApps | 1292 | Android 4.0.3 | 2.4M |
Magnetic Field Sensor 다운로드 Android |
Tuber Technologies | 3094 | Android 7.0 | 7.8M |
Magnetic Field & DC Current Detector 다운로드 Android |
SMF APPS GbR | 3660 | Android 5.0 | 10M |
Physics Toolbox Magnetometer 다운로드 Android |
Vieyra Software | 612 | Android 5.0 | 5.2M |
Magnetic Sensor 다운로드 Android |
Mypro | 1687 | Android 4.1 | 8.8M |
핸드 탈리 카운터 랩 카운터 다운로드 Android |
MegaSimpleApps | 0 | Android 4.4 | 5.9M |
Counter - Click Counter - Tally Counter 다운로드 Android |
Tech Arena Apps | 292 | Android 4.0 | 1.5M |
ThingCounter 다운로드 Android |
Karuma | 15390 | Android 2.2 | 1.9M |
보너스 ***: 더 많은 APK 다운로드 소스
다른 한편에서는 원활한 경험을하려면 파일을 장치에 다운로드 한 후 파일을 사용하는 방법을 알아야합니다. APK 파일은 Android 앱의 원시 파일이며 Android 패키지 키트를 의미합니다. 모바일 앱 배포 및 설치를 위해 Android 운영 체제에서 사용하는 패키지 파일 형식입니다.
네 가지 간단한 단계에서 사용 방법을 알려 드리겠습니다. Turns Counter (Magnetic) 귀하의 전화 번호.
아래의 다운로드 미러를 사용하여 지금 당장이 작업을 수행 할 수 있습니다. 그것의 99 % 보장 . 컴퓨터에서 파일을 다운로드하는 경우, 그것을 안드로이드 장치로 옮기십시오.
설치하려면 Turns Counter (Magnetic) 타사 응용 프로그램이 현재 설치 소스로 활성화되어 있는지 확인해야합니다. 메뉴 > 설정 > 보안> 으로 이동하여 알 수없는 소스 를 선택하여 휴대 전화가 Google Play 스토어 이외의 소스에서 앱을 설치하도록 허용하십시오.
이제 위치를 찾으십시오 Turns Counter (Magnetic) 방금 다운로드 한 파일입니다.
일단 당신이 Turns Counter (Magnetic) 파일을 클릭하면 일반 설치 프로세스가 시작됩니다. 메시지가 나타나면 "예" 를 누르십시오. 그러나 화면의 모든 메시지를 읽으십시오.
Turns Counter (Magnetic) 이 (가) 귀하의 기기에 설치되었습니다. 즐겨!
The app is designed to calculate the number of turns when winding an inductor (inductance coil). A MAGNET SHOULD BE ATTACHED TO THE ROTATING PART. The app (by means of the built-in smartphone magnetic field sensor) determines the number of rotations of the magnet and, therefore, the number of coil turns. It is also possible to determine the rotation of a smartphone without using the magnet (e.g., when winding a large coil). BEFORE TAKING ANY MEASUREMENTS, IT IS NECESSARY TO CALIBRATE THE MAGNETOMETER. To do this, you need to put the smartphone at the selected place (where measurements will be taken), make sure that there is no magnet nearby, and press the TOP "0" button. To reset the number of turns, press the DOWN "0" button TWO TIMES. • Selection of the magnetometer axis. • Sensitivity setting (threshold level). • Alert on reaching the required number of turns. • Countdown. Write a negative number for the countdown. • A photo with the result of the measurement written on it. • Maximum rotation speed: 1200 rpm (20 Hz). AVOID HIGH ROTATIONAL SPEEDS, BECAUSE THE MAGNET CAN COME OFF AND BREAK THE SMARTPHONE. DO NOT USE VERY LARGE MAGNETS. THEY ARE VERY INCONVENIENT TO USE AND CAN BREAK ANYTHING OR INJURE YOU.